608-362-5377 [email protected]
Do you know that the main headlight and the rear tail light are necessary parts for your traffic safety? They are responsible for ensuring the lighting of the routes, signaling with their arrow lights, reverse, and brake.

Over time and exposure to rain and sun, it is typical for the car’s headlight to be damaged, losing the brightness, and getting a yellowish tone that nobody likes. So, how about having tips to conserve bulbs and lights from the car?

Why does the Car Headlight turn yellow?

Before, the headlights of the car were made of glass. This material is sturdier and does not turn yellow over time. It is also more expensive, more substantial, and can crack. Therefore, headlights are being replaced by polycarbonate or acrylic, plastic materials that, today, make up the vast majority of headlamps.

The advantage of plastic headlights is that they are more durable and scratch resistant. Despite this, they suffer greater wear when exposed to the action of UV rays that will yellow the surface and leave the headlight foggy.

And it’s not just an aesthetic question. The yellow car headlight will cause issues as the beams of light emitted by the headlamps and bulbs will be reduced and cause less visibility.

How to care for the rear light and tail light of the car?

Before you finally bid farewell to the car headlights and tail lights, there are some techniques that can restore the look of these parts.

Sanding and polishing can be used to remove yellowing from the lens of car headlights and bulbs. Crystallizers have used bleach on the plastic material to decrease the effects caused by ultraviolet rays. After that, a varnish is applied which protects the lens of the headlights and bulbs, returning glare and protecting the surface. To do this procedure, it is advisable that you seek a specialized professional. Now, if you want to bet on a homemade recipe, a lot of people use toothpaste to clean their lenses. In the short term, that may even work, but over time the yellowing will continue to exist. Take care to ensure proper functioning.

So check out our tips for keeping headlights and bulbs running smoothly.

• Review bulbs, and flashlights;

• Do not drive with burnt out car bulbs. Make the exchange;

• Check the car headlight seal to prevent water ingress;

• Avoid holes that can de-regulate headlights and even burn bulbs;

• Adjust the lights.

• How to adjust the car headlight When doing the periodic review of the car, you need to include the focus adjustment of the headlights on the to-do list.

Thus, you will always have the best visibility of the routes and more safety on the way. And to test if your car has its headlights set, watch that step by step:

1 – Keep your vehicle in a flat place with your tires calibrated at a distance of 5 meters from the wall.

2 – Turn on the headlight and observe that the two lights are aligned correctly. An important tip: Do not move the steering wheel.

3 – To know if they are adjusted, the right and left headlights should be slightly inclined downwards and with the same level of height.

4 – Is there a difference in the focus height of the two sides of the headlights? Then you need to take the mechanic to make the adjustment.

With simple tips, you ensure the proper functioning of the headlight and rear flashlight and provides that your travel is always safe. See how easy it is? For more tips like these, turn on notifications and get the news of the blog firsthand.